Makita DHP486Z Cordless Brushless Hammer Driver Drill 18V LXT® 13mm (1/2″) 125 N·m (1,100 in.lbs.) (Bare Tool)
⏳ Exclusive Discount. Sale ends in {timer}
HIGHLIGHTS: The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque....
Guaranteed Safe Checkout
INSTALLMENT payment is available via BILLEASE (Click for Details).
Frequently Bought Together
HIGHLIGHTS:
The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.
Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 130Nm max. torque. Hammer Drilling mode rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability
FEATURES:
- Increased performance in continuous heavy-duty applications
- Increased max clutch torque enables to adjust clutch torque even when tighteningfasteners into hard material
- Compact and ergonomic design at only 178 mm long
- 0-31,500 IPM for fast hammer drilling in masonry materials
- BL motor delivers 125 N·m of max torque
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- All metal variable 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- All metal gears and gear housing for maximum job site durability
- All metal 13 mm self ratcheting chuck for improved bit gripping strength and durability
- Lightweight for reduced operator fatigue
- 21 clutch settings and drill mode for added fastening control
- 3-stage LED gauge indicates battery charge level
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Twin LED lights with afterglow feature illuminate the work area
- Electric brake for maximum productivity
- Reversing switch is conveniently located
- Keyless chuck for quick and easy bit installation and removal
- Depth gauge for increased drilling consistency.
- Durable, reversible belt clip convenient for temporary tool hanging.
- Battery protection circuit protects against overloading, over-discharging and over-heating
INCLUDES:
Depth Gauge, Side Handle, Belt Clip
| Capacity | Wood (Auger-Bit): 50 mm (2″) |
| Wood (Hole Saw): 152 mm (6″) | |
| Siding Board: 170 mm (6-11/16″) | |
| Chuck Capacity | 1.5 – 13 mm (1/16 – 1/2″) |
| Impacts Per Minute (IPM) | High / Low: 0 – 31,500 / 0 – 8,250 |
| High: 0 – 31,500 | |
| Low: 0 – 8,250 | |
| No Load Speed (RPM) | High / Low: 0 – 2,100 / 0 – 550 |
| High: 0 – 2,100 | |
| Low: 0 – 550 | |
| Max Fastening Torque | Hard / Soft: 130 / 65 N·m (1,150 / 580 in.lbs.) |
| Hard / Soft: 130 / 65 N·m | |
| Max Lock Torque | 125 N·m (1,100 in.lbs.) |
| Max Output | 680 W |
| Vibration Level | Impact Drilling into Concrete: 8.0 m/s² |
| Drilling into Metal: 2.5 m/s² or less | |
| Vibration K Factor | Impact Drilling into Concrete: 1.5 m/s² |
| Drilling into Metal: 1.5 m/s² | |
| Sound Pressure Level | 84 dB(A) |
| Sound Power Level | 95 dB(A) |
| Noise K Factor | 3 dB(A) |
| Dimensions (L x W x H) | w/o Battery: 178 x 81 x 217 mm (7 x 3-3/16 x 8-1/2″) |
| w/ BL1815N / BL1820B: 178 x 81 x 248 mm (7 x 3-3/16 x 9-3/4″) | |
| w/ BL1830B / BL1840B / BL1850B / BL1860B: 178 x 81 x 265 mm (7 x 3-3/16 x 10-3/8″) | |
| Net weight | 2.3 – 2.7 kg (5.1 – 6.0 lbs.) |
DELIVERY OPTIONS are available depending on your location and preference based on available modes of transport.
You may avail of the following services (click HERE to see complete details):
1. DELIVERY RIDER within GMA (Grab/Lalamove/others) - Same Day Delivery for on-stock items (cut-off 12nn)
2. AIR or SEA CARGO (APCargo/Jades Cargo/others) - Estimated Delivery 1-3 weeks *depends on destination
3. REGIONAL BUS (Victory/Florida/Bataan/Genesis/others) - Estimated Delivery 2-5 days *depends on destination
4. NATIONWIDE COURIER SERVICE (LBC/JRS/J&T/others) - Estimated Delivery 3-7 days *depends on destination
5. REGIONAL FLEET SERVICE within GMA (Lalamove/Transportify/others) - Next Day Delivery (on-stock items)
6. PERSONAL PICKUP (Store Visit) *Please confirm stock availability prior to store visit.